About Us

About Garber Metrology

Since its humble beginnings as a small scale company in 1975, Garber Metrology has grown to become one of the premier Weighing Equipment/Calibration Companies in the Mid-Atlantic Region. Today the company operates two distinct but closely connected divisions: Weighing Solutions and Calibration/Metrology Services.

Garber Metrology is one of the region’s largest distributors of weighing equipment, representing many of the industry’s most prestigious manufacturers. Garber sells a wide array of weighing equipment, from precision laboratory balances with accuracies in milligrams to truck and railroad scales with capacities exceeding 250 tons. Garber Metrology retains the experience and expertise to calibrate, troubleshoot, and repair all of the equipment we sell in addition to providing custom programming solutions and maintaining a fleet of rental equipment.

Calibration/Metrology services are delivered via our in-house laboratories (including our temperature and humidity controlled physical/dimensional lab), and on-site at our customers’ facilities. These services cover a wide range of instruments, gages, and equipment.

Garber Metrology maintains the highest levels of quality and is ISO 9001 Registered by NQA, and ISO/IEC 17025 and ANSI/NCSL Z540-1-1994 Accredited by ANAB. The company’s scope of accreditation is broad, encompassing dimensional, mechanical, electromagnetic DC/low frequency, and thermodynamic disciplines.

Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration/metrology services, and a broad scope of accreditation.


Garber Metrology Quality Management System

Consistently exceeding customer expectations and delivering an outstanding customer experience is our goal at Garber Metrology. Our commitment to our Quality Program is paramount to the achievement of our customer service objective.

The overall quality system is based on the methodology known as “Plan-Do-Check-Act” and on the requirements of ISO 9001 and ISO/IEC 17025. The following diagram along with the Process Map identifies the major processes within the Quality Management System. Outsourced processes are controlled through special provisions in the purchasing process.

Establish the objectives and processes necessary to deliver results that meet or exceed customer requirements and the organization’s policies.

Implement the processes.

Monitor, measure where applicable, and analyze processes and product against policies, objectives, and requirements for the product and report the results.

Take actions to continually improve process performance.

Frequently Asked Questions

You should include a list of gages, their ID numbers and your requested calibration intervals for each gage.  With this information, we can track your gages and inform you when they are scheduled for recalibration.

Review your manufacturer’s recommendations for calibration intervals. Also, if your instrument has been impacted in any way, you many need to have it recalibrated.

You can securely wrap your gages and place them into a shipping container and ship them to 520 East Oregon Road | Suite 101 | Lititz, PA 17543.  Our shipping and receiving department will enter your gage info into our system and it will be tracked through the calibration process then securely wrapped and return shipped back to you within 5 business days after receiving.

Our field Techs will travel wherever makes sense to get the job done.  We have serviced companies from South Carolina to Tennessee out to Ohio and up to Connecticut.  Our pick-up and delivery services span through Pennsylvania, New Jersey, Delaware, Maryland, and Virginia.

Call 717-393-1708 X: 444 to request a quote and a date for pick-up.  One of our drivers will stop by based on the day we service your area and pick-up your gages and then drop them off the following week on the same day.

Yes, you can drop off your gages at our facility located at 520 East Oregon Road | Suite 101 | Lititz, PA 17543.  Our friendly personnel will greet you at our shipping door to assist you with your drop off and pick-up.

Call 717-393-1708 X: 403 for a quote and to schedule our field Technicians to come to your location to calibrate your gages.

Yes, we have state-of-the-art software that will track all your gages and email you a list of what is due one month prior to your requested calibration interval due date.  Just let us know the calibration interval when sending in your gages.

Garber Metrology has a vast array of capabilities that can be viewed here and we are always expanding and adding to our scope.  If one or more of your items fall outside of our capabilities, we can handle them by sending them to one of our calibration partners.  Leave the work to us, we will send them out and receive them all while tracking them through our state-of-the-art software system.  We can not offer our 5 business day turnaround for these services, but we will ensure your gages are calibrated according to your requirements and will return them once completed.

Downloadable Resources

orange pdf document

ISO/IEC 17025:2017 Accreditations

orange pdf document

ISO 9001:2015 Certification

orange pdf document

ANSI/NCSL Z540-1 Compliant

orange pdf document

Calibration Capabilities List



Garber Metrology staff adheres to stringent quality procedures and industry standards regardless of where our services are performed. To learn more or to receive a free quote contact us today.


Recent posts